ERDI LRF Specs

Home › Answers › What do golf and hunting rangefinder brands

What do golf and hunting rangefinder brands specify in a laser module?

For a consumer laser rangefinder the module is chosen on five numbers, not on the headline range: near-range at short distances, accuracy, mass, update rate while panning, and eye safety class for a product sold without warning labels. A 905 nm DToF module at 5–1200 m, ±0.3 m, about 5 g and Class 1 covers most of the consumer segment; the range printed on the box is then your firmware's decision, provided the module states its target and reflectance.

Matching modules from the catalogue

ModelWavelengthPublished rangeAccuracyMassInterface
LRF0305C1535 nm4 km±1 m14 gUART-TTL
LRF0306C1535 nm4 km±1 m14 gUART-TTL
LRF0105C1535 nm3 km±2 m29 g—
LRF3000A1905 nm3 km±0.7 m12 gUART-TTL
LR1500D23905 nm1.5 km±1 m20 gUART-TTL
LR1500E2905 nm1.5 km±1 m10 gUART-TTL

The conditions behind those numbers

Full detail and the manufacturer's original wording: sport optics OEM page · all 59 range conditions · filter the catalogue yourself

Questions people ask about this

What range do consumer brands actually need?

Most golf and hunting products publish 400–1500 m. The useful engineering number is not the maximum; it is the range at which the module still returns a value on a deer-sized target at 30 % reflectance, and on a flagstick at close range.

Why does near-range matter more than maximum range?

A golf product is used at 5–300 m. A module that starts at 5 m is usable; one that starts at 20 m is not, however far it reaches. Near-range is a firmware and optics question, so ask for it explicitly.

Is a Class 1 module enough for a consumer product?

Yes. Class 1 is eye-safe without a warning label under normal use, which is what a retail rangefinder needs. Ask for the classification at the module level, with the measurement condition, and keep that document for the product file.

What does the module change about the product?

It fixes the optical axis, the timing budget and the power budget. Everything the customer sees — slope, pin-lock, display — stays in your firmware. That split is why brands buy a module instead of building the laser side.

Other buyer questions answered the same way

Send the requirement, not a part number Target size, reflectance, required range, mass budget, interface, quantity. Two candidates and their limiting factor come back. Email specs@erdilrf.com All answers

Figures transcribed from the linked manufacturer pages. Conditions are quoted verbatim; nothing here extrapolates a range to a target the manufacturer did not test.

Need a quote on this? or get the 905/1535 selection table