ERDI LRF Specs

Home › Series › LR series

LR series — 905 nm integrated rangefinder modules

Silicon-detector modules for 1 to 2 km against vehicle-sized targets: 10 to 20 g, UART or IIC, 10 Hz or better. The cost-efficient choice when a 1535 nm budget is not justified.

11 models · published range 1 km – 2 km · mass 10–20 g · filter the whole matrix

ModelMax rangeAccuracyRateMassInterface
LR2000E22 km±1 m10 HzUART-TTL
LR2000E42 km±1 m10 HzUART-TTL
LR1500D231.5 km±1 m10 Hz20 gUART-TTL
LR1500E21.5 km±1 m10 Hz10 gUART-TTL
LR1500E41.5 km±1 m10 Hz10 gUART-TTL
LR1000D231.2 km±1 m12 Hz20 gUART-TTL
LR1200D231.2 km±1 m10 Hz20 gUART-TTL
LR1200E21.2 km±1 m10 Hz10 gUART-TTL
LR1200E41.2 km±1 m10 Hz10 gUART-TTL
LR1000E21 km±1 m10 Hz10 gUART-TTL
LR1000E41 km±1 m10 Hz10 gUART-TTL

Choosing inside this series

Range, mass and interface move together here: the longest-reach parts are the heaviest and run RS-422, while the lightest parts are short-range and run UART-TTL. Pick the two you cannot negotiate, then read the model page for the test condition behind the range figure — a 11-model series usually quotes several different targets.

Need two or three candidates, not a catalogue? Target size, required range, mass budget and interface. Email tommy@erdimail.com Full matrix